| All Products |
|
|
DPL-1
Space saving design only 1.4(35.6mm) deep
Occupies less than 2.5 x 1.1 inches of front panel space
High contrast LCD
3-1/2 digits with 0.39 LCD
Snap-In bezel eliminates the need for mounting hardware
User Selectable Decimal Points
Process input (4 to 20mA) adder board with multi-turn SPAN (GAIN) and ZERO (OFFSET) adjustments
Loop powered
|
|
|
|
DP-682 Series
Large 0.3 (8mm) LCD display.
1/32 DIN panel size.
Displays up to 9,999,999.
Front panel reset can be disabled.
Removable ratchet clip mounting, requires no tools.
|
|
|
|
DP-692x Series
Large 0.3 (8mm) LCD display.
1/32 DIN panel size.
Displays up to 9,999,999.
Front panel reset can be disabled.
Removable ratchet clip mounting, requires no tools.
|
|
|
|
DP-CU40K - DP-CU63KC
Totalizing, one/two preset, HI/LOW/GO settings
Available in 4 or 6 digit LED
Character height of 0.56"
Memory ranges of -999 to 9999 and -99999 to 999999
Setting ranges of 1 to 9999, and 1 to 999999
EEPROM memory retains data for ten years
Dimensions: 96mm X 48mm X 110mm
|
|
|
|
DP-7010 and DP-7020
Dimensions: 27.6mm (w) x 17.7mm (h) x 6.5mm (d).
Panel cutout 29.4mm x 22mm.
Optional flying leads for remote contact closure input.
Optional magnetic reed switch.
Self powered, using CMOS circuitry, for 3 - 4 years using a single standard 1.5V button cell.
4 digit, 6mm characters, high contrast LCD.
Integral de-bounce circuitry.
cUL/CSA, UL recognized.
|
|
|
|
DP-7911
Easy to operate.
Locatable decimal point (up to 3 places).
Reset is user configurable to reset to zero (adding) or reset to preset (subtracting).
Front panel sealing to IP65 using the sealing gasket supplied.
Opto-isolated count and reset inputs.
Operates for up to 10 years @ 20°C or 106 relay operations, with internal user replaceable lithium batteries.
Relay contacts are rated at 8A programmable to NO or NC.
CE Certified.
|
|
|
|
DP-7922
Simple programming.
High visibility supertwist LCD.
Backlight programmable.
40 years data retention with no power.
Two programmable preset points.
Up to 3 decimal places.
Wide range of prescaling.
12VDC output to drive a sensor.
85-265VAC or 10-26VDC for world- wide use.
Two output relays with contacts rated at 5A.
Output relays individually programmable to NO or NC.
Outputs can be set to latch or set to pulse.
CE, cUL and UL recognized.
|
|
|
|
DP-7932
6 Digit Supertwist LCD
Programmable
Environmental protection to IP65.
EEPROM Data Storage
Backlight programmable.
40 years data retention with no power.
Up to 3 decimal places.
Operates from 85-265VAC or 10- 26VDC
12VDC output to drive a sensor (when AC powered).
Opto-isolated inputs.
Output relay contacts rated at 5A.
Output can be set to latch or pulse.
Standard DIN housing.
CE, cUL and UL recognized.
|
|
|
|
DP-9100
Easily programmed in English, German, French or Spanish.
3 line Supertwist LCD viewable from any angle.
EEPROM retains program and data for 40 years with no power.
CAN bus DEVICE NET interface.
Can be powered from 85 - 265VAC for world wide use.
Multiplying and dividing prescalers for display directly in engineering units.
Auxiliary 12VDC 100mA power output to power sensor.
Environmental protection to IP65.
CE approved. cUL and UL recognition pending.
|
|
|
|
DP-7951
Simple programming.
Large, easy to read LCD.
9 timing ranges from 0.2 seconds to 99999 hours.
Internationally understood annunciators.
Self powered, 10 year battery life.
Opto-isolated inputs 12-260VAC or DC.
Three different triggering mechanisms.
Relay contacts rated at 8A, programmable to NO or NC.
Environmental protection to IP65.
CE approved, cUL and UL recognition pending.
|
|
|
|
DP-7955
Simple programming.
8 timing ranges from 0.2 second to 999 hours.
8 timing modes.
3 digit LCD with Internationally understood annunciators.
10 year battery life.
Opto-isolated inputs 12-260VAC or DC.
Relay contacts rated at 8A, programmable to NO or NC.
CE, cUL and UL recognized.
|
|
|
|
DP-H57
7 digit 4mm white on black for hours, red on black for decimal.
Standard 48 x 48 DIN size.
Rugged and insulated plastic case.
DC or AC (50 or 60Hz). Synchronous motor drive available.
Quartz crystal frequency control available.
Extended temperature range model available.
Isolation protection to VDEO435.
|
|
|
|
DP-HK07 Series
White on black digits for hours, red on black for decimal.
7 digit readout.
Magnifying lenses to increase readout to 4mm high.
Retains count during power failure.
IP65 protection available.
Highly resistant to shock/vibration.
Wide operating temperature range.
Average power consumption as low as 10mW.
Range includes solderable and wash-proof versions.
|
|
|
|
B148E
Flush mounted with bracket. The B148E unit fits into a 1.79x1.79in. (45.5x45.5mm) cut-out. The thickness of the panel for flush mounting can be up to 0.35in. (9mm). The unit is secured in position by a plastic mounting bracket. Also fits square or round openings for 72mm meters with optional 72mm bezel.
|
|
|
|
DP-RU41P - DP-RU42P
Tachometer and Line SP/U
KIP-switch setup
Available in 4 digit LED
Character height of 0.56"
Input level: NPN
Display ranges of 0.1 to 9999
Setting ranges of 1 to 9999
Dimensions: 96mm X 48mm X 110mm
|
|
|
|
DP-RF40A - DP-RLF40A
4 Digit Tachometer & Line Speed meter.
Character height of 0.8", red LED
Display range of 0.1 to 9999
Input signal: NPN
Sampling time of 1.4 seconds.
Frequency response
Can accomodate DC 110V/220V 50Hz/60Hz powersupply
|
|
|
|
DP-350, -352, -354
Large (0.56"²) 3 1/2-digit Green or Red LED display
Low power consumption (5VDC, 200mA) Differential input 3 voltage ranges User-selectable decimal point Hold-display function, Auto zero
DP-350, DP-352, DP-354, DP-350G, DP-352G, DP-354G
|
|
|
|
DP-370 Series
Occupies less than 2.3" x 1.1" of front panel space Mount or window mount with optional bezel
3-1/2 digits with 0.56 red or green LED User Selectable Decimal Points
Widest adjustment range with multi-turn SPAN (GAIN) and bi-directional ZERO (OFFSET)
Loop controlled DP-370R, DP-370G
|
|
|
|
DP-650, -652, -654
Convenient snap-in bezel package
Very low power consumption (5VDC @ 3mA)
Differential input, 3 voltage ranges
0.1% typical accuracy
User-selectable decimal point
Hold-display function
Overvoltage protection
Quantity discounts
|
|
|
|
DP-650A Series
Low power: 2.5mA (+5V)
Snap-in bezel mount eliminates mounting hardware
Low-cost, high-performance replacement for many OEM DPMs
Less than 1" (25 mm) deep, occupies only 2.5" X 1.1" of front panel space
3 1/2 digits with high-contrast LCD
|
|
|
|
DP-650A Backlit
Bezel mount using retaining clips
Low power: 2.5mA (+5V)
Low-cost, high-performance replacement for many OEM DPMs
Only 1" (25 mm) deep, occupies less than 2.5" X 1.1" of front panel space
3 1/2 digits with high-contrast LCD Optional Red or Green backlighting (backlight power is isolated from DPM power)
|
|
|
|
DP-650W
Low power: choice of 180µA (9V, ħ5V) or 2.5mA (+5V)
Optional Red or Green backlighting
Low-cost, high-performance replacement for many OEM DPMs
Only 1" (25 mm) deep, occupies less than 2.4" X 1.0" of front panel space
3 1/2 digits with high-contrast LCD
|
|
|
|
DP-670 Series
Process input (4 to 20mA) adder board with multi-turn
SPAN (GAIN) and ZERO (OFFSET) adjustments
Loop powered
Snap-In bezel eliminates the need for mounting hardware
User Selectable Decimal Points
Only 0.67(17mm) deep, Occupies 2.3" x 1.1" of front panel space
3 1/2 digit, High contrast 0.39 LCD
|
|
|
|
DP-670A Series
4 to 20 mA loop powered input
Snap-in bezel mount eliminates mounting hardware
Resistant to RF and EMI
Low-cost, high-performance replacement for many OEM DPMs
3 1/2 digits with high-contrast LCD
|
|
|
|
DPV-3
12V or 24V DC Voltage powered
Snap-in bezel mount
Resistant to RF and EMI
User selectable, displayed engineering units
3 1/2 digit, high-contrast LCD; optional Red, Blue, Green or Amber backlighting
Low-cost, high-performance replacement for many OEM DPMs
|
|
|
|
DP-VU32P - DPVU42P
KIP-switch setup
Voltage & current indicator
4 digit LED display
Character height of 0.56"
Sampling time of about 3 cycles/sec
Output system: Relay output
Output delay time: 0.1 to 9.9 seconds
Flush mounting
Dimensions: 96mm X 48mm X 110mm
|
|
|
|
DPL-3
Loop-powered
Resistant to RF and EMI
Optional Red, Blue, Green or Amber backlighting
Snap-in bezel mount eliminates mounting hardware
Low-cost, high-performance replacement for many OEM DPMs
|
|
|
|
DP-430 Series
Resistant to RF and EMI
Snap-in bezel mount
3 1/2 digits with high-contrast LCD
Optional Blue, Red, Green, or Amber backlighting
User selectable, displayed engineering units
Low-cost, high-performance replacement for many OEM DPMs
|
|
|
|
DP-VU41K - DP-VU53K
Keyboard setup
Voltage & current indicator
4 or 5 digit LED display
Character height of 0.56"
Display range of 0 to 19999
Sampling time of about 3 cycles/sec
Output system: Relay output
Output delay time: 0.1 to 9.9 seconds
Flush mounting
Dimensions: 96mm X 48mm X 110mm
|
|
|
|
DP-VF40 - DP-VF31
Voltage & current in
3 1/2 digit or 4 1/2 digit LED display
Analog indicator
3-digit preset
Multiple range scaling
Character height of 0.56" or 0.8" LED
Display range of 0 to 999, 0 to 1999, 0 to 9999, or 0 to 19999
Flush mounting
Dimensions: 96mm X 48mm X 95mm
|
|
|
|
DP-176 Series
Convenient flat panel package
Shallow depth (0.32"²)
Ideal for battery operation
Very low power consumption (9VDC @ 180µA)
5V or 9V version for differential inputs, 5V for single-ended inputs
0.1% typical accuracy
User-selectable decimal point
Overvoltage protection
Quantity discounts
|
|
|
|
DP-800 -900 Series
3-1/2 digit LED with .8 green, orange or red digits or 3-1/2 digit LCD with .98 digits for easy viewing
Decimal point user selectable
Snap-in panel mounting
Gasket and clamp provided for NEMA 4 or 12 applications DP-801, DP-802, DP-803, DPL-8, DP-841, DP-842, DP-843, DP-851, DP-852, DP-853, DP-951, DP-952, DP-953
|
|
|
|
DP-M Series Volt Meters
Two lines; one for current value (red LED), one for setting value (green LED)
Voltage & current indicator
Multi-function
Multiple range scaling
5 digit LED display
Character height of 0.56" for the red and 0.3" for the green LED
Display range of -19999 to 99999
Weight" 285g
Dimensions: 96mm X 48mm X 140mm
|
|
|
|
DP-2000A Series
4 1/2-digit resolution - ħ19,999 counts
High accuracy - ħ0.02% typical error Overvoltage protection
3 voltage ranges
Very low power consumption (15mW )
5VDC Power
Snap-in bezel
User-selectable decimal point
Hold-display function
|
|
|
|
DP-2000W Series
4 1/2 digits (ħ19,999 counts) with high-contrast LCD
Window mount or surface mount
Low power: 1.5mA (9V, ħ5V) or 3 mA (+5V)
Optional loop powered 4 to 20mA process inputs
Only 1" (25 mm) deep, occupies less than 2.4" X 1.0" of front panel space
|
|
|
|
DPV-4
12V or 24V DC Voltage powered
Resistant to RF and EMI
4 1/2 digit LCD
Optional Red, Blue, Green or Amber backlighting
Snap-in bezel mount
User selectable, displayed engineering units
Low-cost, high-performance replacement for many OEM DPMs
|
|
|
|
DPL-4
4 to 20 mA loop powered input
Resistant to RF and EMI
4 1/2 digit LCD
Optional Red, Blue, Green or Amber backlighting
User selectable, displayed engineering units
Snap-in bezel mount
Low-cost, high-performance replacement for many OEM DPMs
|
|
|
|
DPV-8
Rangeable Voltage
Large,.98, 3-1/2 digit display.
Optional Red, Blue, Green or Amber backlighting
Decimal point user selectable
Snap-in panel mounting
Gasket and clamp provided for optional NEMA applications
|
|
|
|
DPL-8
Loop powered
Provides a large,.98, 3-1/2 digit display.
Optional Red, Blue, Green or Amber backlighting
Decimal point user selectable
Eng. units user selectable
Snap-in panel mounting
|
|
|
|
DP-440 Series
High resolution ħ20,000 counts
Resistant to RF and EMI
4 1/2 digit LCD
Optional Blue, Red, Green or Amber backlighting
Snap-in bezel mount
User selectable, displayed engineering units
Low-cost, high-performance replacement for many OEM DPMs
|
|
|
|
DP-50 Series
Low-cost, high-performance miniature snap-in DPM with annunciators
Snap-in bezel mount
Only .5 deep, occupies less than 1.75" X .95" of front panel space
3 1/2 digits with high-contrast LCD
Extra contrast annuciators and decimal points
|
|
|
|
DP-186 Series
Ultra-thin: only 0.8 deep including connector
Low-cost
Low power
Window mount
Occupies less than 1.3 X .7 inches of front panel space
3 1/2 digits with high-contrast LCD,
Choice of Positive or Negative Red or Green backlight
|
|
|
|
Rotary DIP Switches
-
|
|
Magnetic
|
Magnetic Proximity Sensors SMC Series
|
|
FT18M Series
|
Photoelectric Sensors, 10 ÷ 30 VDC
|
|
FT18 Series
|
Photoelectric Sensors, 20 ÷ 250 VAC
|
|
FTQ Series
|
Photoelectric Sensors, 10 ÷ 30 VDC, Compact Size 50 x 50 x 18 mm
|
|
FT18EL Series
|
Fiber Optic Sensors - FT18M - CFR Types
|
|
FT13-CF Series Fork Shape
|
Photoelectric Sensors, Detecting non transparent and translucent materials, Metallic housing with 13 mm fork shape
|
|
Characteristic Curves
|
For FT18M - FT18 - FT18EL - FTQ types
|
|
Reflectors
|
Type CT
|
|
|
|
Plaimae Pushwheel
-
|
|
|
|
Plaimae Ordering Information
-
|
|
Namur
|
Namur Inductive Sensors
|
|
Namur Ring
|
RING HOUSING SIA05 - SIA12 - SIA15 - SIA22 - SIA30 - SIA44 - SIA63 - SIA100 -- 2 WIRES D.C. - VERSION-N
|
|
Cylindrical SI 4 - SI 5
|
Inductive Sensors 0 4mm, M5 x 0.5
|
|
Cylindrical SI 6.5
|
Inductive Sensors 0 6.5mm
|
|
Cylindrical SI 8
|
Inductive Sensors M8 x 1
|
|
Cylindrical SI 12
|
Inductive Sensors M12 x 1
|
|
Cylindrical SI 18
|
Inductive Sensors M18 x 1
|
|
Cylindrical SI 30
|
Inductive Sensors M30 x 1.5
|
|
Rectangular SIP A8/C8/10
|
Rectangular Inductive Sensors SIP A8 - SIP C8 - SIP 10
|
|
Rectangular SIP 12/17/25
|
Rectangular Inductive Sensors SIP 12 - SIP 17 - SIP 25
|
|
Rectangular SIP 40
|
Rectangular Inductive Sensors SIP 40
|
|
Rectangular SIQ 80
|
Rectangular Inductive Sensors SIQ 80
|
|
Ring SIA
|
Inductive Ring Sensors SIA Series
|
|
SC18
|
Capacitive Proximity Sensors M18 x 1
|
|
SC30
|
Capacitive Proximity Sensors M30 x 1.5
|
|
SC40
|
Capacitive Proximity Sensors M40 x 1.5
|
|
SC30P-RE25T Relay Out.
|
Delayed Programmable Capacitive Sensors SC30P-RE25T Type
|
|
Protection Housing
|
Protection Housing for Capacitive Proximity Sensors SCM
|
|
High Temperature
|
High Temperature Capacitive Sensors ALSC - SC18M-HT/SC30M-HT
|
|
Application Examples
|
Capacitive Proximity Sensors - Application Examples
|
|
Series FT
|
Photoelectric Sensors
|
|
FTL-FDL
|
Fiber Optic Sensors
|
|
|
|
|