| Count Meters |
|
|
DP-682 Series
• Large 0.3” (8mm) LCD display.
• 1/32 DIN panel size.
• Displays up to 9,999,999.
• Front panel reset can be disabled.
• Removable ratchet clip mounting, requires no tools.
|
|
|
|
DP-CU40K - DP-CU63KC
• Totalizing, one/two preset, HI/LOW/GO settings
• Available in 4 or 6 digit LED
• Character height of 0.56"
• Memory ranges of -999 to 9999 and -99999 to 999999
• Setting ranges of 1 to 9999, and 1 to 999999
• EEPROM memory retains data for ten years
• Dimensions: 96mm X 48mm X 110mm
|
|
|
|
DP-7010 and DP-7020
• Dimensions: 27.6mm (w) x 17.7mm (h) x 6.5mm (d).
• Panel cutout 29.4mm x 22mm.
• Optional flying leads for remote contact closure input.
• Optional magnetic reed switch.
• Self powered, using CMOS circuitry, for 3 - 4 years using a single standard 1.5V button cell.
• 4 digit, 6mm characters, high contrast LCD.
• Integral de-bounce circuitry.
• cUL/CSA, UL recognized.
|
|
|
|
DP-7911
• Easy to operate.
• Locatable decimal point (up to 3 places).
• Reset is user configurable to reset to zero (adding) or reset to preset (subtracting).
• Front panel sealing to IP65 using the sealing gasket supplied.
• Opto-isolated count and reset inputs.
• Operates for up to 10 years @ 20°C or 106 relay operations, with internal user replaceable lithium batteries.
• Relay contacts are rated at 8A programmable to NO or NC.
• CE Certified.
|
|
|
|
DP-7922
• Simple programming.
• High visibility supertwist LCD.
• Backlight programmable.
• 40 years data retention with no power.
• Two programmable preset points.
• Up to 3 decimal places.
• Wide range of prescaling.
• 12VDC output to drive a sensor.
• 85-265VAC or 10-26VDC for world- wide use.
• Two output relays with contacts rated at 5A.
• Output relays individually programmable to NO or NC.
• Outputs can be set to latch or set to pulse.
• CE, cUL and UL recognized.
|
|
|
|
DP-7932
• 6 Digit Supertwist LCD
• Programmable
• Environmental protection to IP65.
• EEPROM Data Storage
• Backlight programmable.
• 40 years data retention with no power.
• Up to 3 decimal places.
• Operates from 85-265VAC or 10- 26VDC
• 12VDC output to drive a sensor (when AC powered).
• Opto-isolated inputs.
• Output relay contacts rated at 5A.
• Output can be set to latch or pulse.
• Standard DIN housing.
• CE, cUL and UL recognized.
|
|
|
|
DP-9100
• Easily programmed in English, German, French or Spanish.
• 3 line Supertwist LCD viewable from any angle.
• EEPROM retains program and data for 40 years with no power.
• CAN bus DEVICE NET interface.
• Can be powered from 85 - 265VAC for world wide use.
• Multiplying and dividing prescalers for display directly in engineering units.
• Auxiliary 12VDC 100mA power output to power sensor.
• Environmental protection to IP65.
• CE approved. cUL and UL recognition pending.
|
|
