| Time Meters |
|
|
DP-692x Series
• Large 0.3” (8mm) LCD display.
• 1/32 DIN panel size.
• Displays up to 9,999,999.
• Front panel reset can be disabled.
• Removable ratchet clip mounting, requires no tools.
|
|
|
|
DP-7932
• 6 Digit Supertwist LCD
• Programmable
• Environmental protection to IP65.
• EEPROM Data Storage
• Backlight programmable.
• 40 years data retention with no power.
• Up to 3 decimal places.
• Operates from 85-265VAC or 10- 26VDC
• 12VDC output to drive a sensor (when AC powered).
• Opto-isolated inputs.
• Output relay contacts rated at 5A.
• Output can be set to latch or pulse.
• Standard DIN housing.
• CE, cUL and UL recognized.
|
|
|
|
DP-7951
• Simple programming.
• Large, easy to read LCD.
• 9 timing ranges from 0.2 seconds to 99999 hours.
• Internationally understood annunciators.
• Self powered, 10 year battery life.
• Opto-isolated inputs 12-260VAC or DC.
• Three different triggering mechanisms.
• Relay contacts rated at 8A, programmable to NO or NC.
• Environmental protection to IP65.
• CE approved, cUL and UL recognition pending.
|
|
|
|
DP-7955
• Simple programming.
• 8 timing ranges from 0.2 second to 999 hours.
• 8 timing modes.
• 3 digit LCD with Internationally understood annunciators.
• 10 year battery life.
• Opto-isolated inputs 12-260VAC or DC.
• Relay contacts rated at 8A, programmable to NO or NC.
• CE, cUL and UL recognized.
|
|
|
|
DP-H57
• 7 digit 4mm white on black for hours, red on black for decimal.
• Standard 48 x 48 DIN size.
• Rugged and insulated plastic case.
• DC or AC (50 or 60Hz). Synchronous motor drive available.
• Quartz crystal frequency control available.
• Extended temperature range model available.
• Isolation protection to VDEO435.
|
|
|
|
DP-HK07 Series
• White on black digits for hours, red on black for decimal.
• 7 digit readout.
• Magnifying lenses to increase readout to 4mm high.
• Retains count during power failure.
• IP65 protection available.
• Highly resistant to shock/vibration.
• Wide operating temperature range.
• Average power consumption as low as 10mW.
• Range includes solderable and wash-proof versions.
|
|
|
|
B148E
Flush mounted with bracket. The B148E unit fits into a 1.79x1.79in. (45.5x45.5mm) cut-out. The thickness of the panel for flush mounting can be up to 0.35in. (9mm). The unit is secured in position by a plastic mounting bracket. Also fits square or round openings for 72mm meters with optional 72mm bezel.
|
|
