View Cart | Contact Us | My Account 
Call us Toll-Free: 888-472-6676 
 DP-7932
 6 digit supertwist LCD programmable preset counter/timer with prescaler and EEPROM data storage in an IP65 DIN case.
This versatile count up or count down predetermining counter/timer with prescaler has a wide range of innovative and attractive features. Designed with imagination and built to the highest standards it offers both counting and timing functions in one unit.
 
The count inputs are opto-isolated and can be sink (NPN) or source (PNP). The count is on the main display and the preset value is on the lower display. Reset can be remote, manual or automatic with a manual over-ride option. All programming, reset and presetting can be carried out from the front panel although the keys can be remotely disabled from the rear of the unit..
 
Please note the electrical connections are different to the previous version (7931)
 
Instructions in PDF

  Features
• Simple programming via menu driven display.
• High visibility supertwist LCD display can be viewed from any angle.
• Backlight programmable ON, OFF or AUTO.
• 40 years data retention with no power.
• Programmable decimal point up to 3 places.
• Operates from 85-265VAC or 10-26VDC.
• 12VDC output to drive a sensor (when AC powered).
• Opto-isolated inputs.
• Wide range of prescaling.
• Output relay contacts rated at 5A.
• Output can be set to latch or pulse with programmable pulse duration.
• Environmental protection to IP65.
• Standard DIN housing.
• CE, UL and cUL approved.
  Specifications
Supply Voltage 85 - 265VAC or 10 - 26VDC at 100mA.  
Auxiliary Output Supply 12VDC +/- 10% @ 100mA (when operating from AC supply).  
Display 2 rows of 6 digits, supertwist black on silver LCD with yellow/green LED backlight. Upper row 7mm (0.28in) high indicates count, lower row 4mm (0.16in) high indicates P1 preset point. Also Relay Active annunciator.  
Backlight Control Programmable to Always ON, Always OFF or AUTO (ON for 30s following last keypress).  
Preset Points User selectable preset point 1 - 999999.  
Count Inputs High Speed NPN/PNP.  
  Opto-isolated 10 - 30VDC. Maximum input frequency 10kHz.  
  Low Speed  
  Opto-isolated 12 - 260VAC/DC. Maximum input frequency 30Hz.  
Prescaler Multiply 0.00001 - 9.99999, default 1.00000.  
  Divide 1 - 99999, default 00001.  
Manual Reset Can be disabled on installation or remotely.  
Remote Reset Contact closure or pulse (15 ms response time).  
Automatic Reset Programmable for automatic or Manual/Remote reset.  
Data Retention 40 years minimum.  
Output Relay Contact Connection SPDT.  
  Contact Rating 5A 260 VAC 30 VDC 1300 VA/150 W.  
Operating Temp. -10°C to +60°C.  
Storage Temp. -20°C to +70°C.  
Environmental Protection IP65 when properly installed using the sealing gasket supplied (without bezel).
  Applications
• Production counting  
• Cut to length control  
• Batch control
  Dimensions
       
  Height 1.89" (48 mm)  
  Width 1.89" (48 mm)  
     
 
   
   
 Item NumberDescriptionPrice 
  Click here to ask us a question NEW: Download a PDF of All Panel Meters:
  All Panel Meters PDF †(compressed zip file, 4.1 MB;)

  † This PDF does not include sensors or switches


 



Distributors welcome.
Panel Meters | Count / Time Meters | Sensors
 HVAC Controls | Switches | View All Categories
 Home | PDF Center | Contact Us		 Acculex / HR Components
PO Box 10300 - Bedford NH 03110
888-472-6676 phone - 888-210-0119 fax  
 (International:  1-603-472-4727 phone -  1-603-472-2159 fax)