The small panel-mounted 1/32 DIN DP-682 counters incorporate a large 0.3” (8mm) high liquid crystal display for easy viewing. Powered by an internal battery, they have a data retention life of 10 years minimum, with no connection to any external power source. This allows application in portable or remote devices, machines where wiring may be difficult, or in low voltage systems. They may eliminate the need for slip-rings in rotating machinery.
They feature a front panel reset switch as well as a rear panel terminal reset. The front panel reset pushbutton switch may be disabled to prevent accidental resets by removing a jumper on the rear. Counting may be initiated by contact closure, low-voltage input, or high-voltage input options.
The DP-682 counters can monitor up to 10 million events. They are easily mounted through the panel, without tools, by means of a removable ratcheting clip.
Features
• Large 0.3” (8mm) LCD display.
• 1/32 DIN panel size.
• Displays up to 9,999,999.
• Front panel reset can be disabled.
• Removable ratchet clip mounting, requires no tools.
Specifications
Item No
DP-682N
DP-682P
DP-682A
Input
Contact closure or open collector, 1 count per pulse, 10 Hz max.
Low voltage, Hi (6.5 to 24 VDC) and Lo (0 to 4 VDC), 1 count per pulse, 10 Hz max.
High voltage, 90 to 240 V AC/DC, 1 count per pulse, 10 Hz max.
Range
0 to 999,999.9 counts
0 to 999,999.9 counts
0 to 999,999.9 counts
Mounting
Insert the counter/timer into the cutout from the front of the panel. Slide the mounting bracket over the back of the unit. While holding the unit from the front of the panel, push the mounting bracket toward the rear of the panel as tightly as possible.
Common Specifications
Data Retention
10 years minimum
Mounting
Through the panel bezel-mount, push-on (removable) bracket
Size
1.89W x 0.95H x 1.89”D (48W x 24H x 48mmD), with 0.16” (4.0mm) in front of panel
Panel Cutout
1.77W x 0.87H, +0.008/-0.00 inches (45W x 22H, +0.2/-0.0 mm)
Click
here to ask us a question
