The small panel-mounted 1/32 DIN DP-692 timers incorporate a large 0.3” (8mm) high liquid crystal display for easy viewing. Powered by an internal battery, they have a data retention life of 10 years minimum, with no connection to any external power source. This allows application in portable or remote devices, machines where wiring may be difficult, or in low voltage systems. They may eliminate the need for slip-rings in rotating machinery.
They feature a front panel reset switch as well as a rear panel terminal reset. The front panel reset pushbutton switch may be disabled to prevent accidental resets by removing a jumper on the rear. Counting or timing may be initiated by contact closure, or high-voltage input options.
The DP-692 timers can sense up to 1 million hours of operation with 0.1 hour resolution, or 1 million minutes with 0.1 minute resolution. They are easily mounted through the panel, without tools, by means of a removable ratcheting clip.
Features
• Large 0.3” (8mm) LCD display.
• 1/32 DIN panel size.
• Displays up to 9,999,999.
• Front panel reset can be disabled.
• Removable ratchet clip mounting, requires no tools.
Specifications
Item No
DP-692NM
DP-692NH
DP-692AM
DP-692AH
Input
Contact closure or open collector
High voltage, 90 to 240 V AC/DC
Range
0 to 999,999.9
0 to 999,999.9
0 to 999,999.9
0 to 999,999.9
Units
Minutes
Hours
Minutes
Hours
Mounting
Insert the counter/timer into the cutout from the front of the panel. Slide the mounting bracket over the back of the unit. While holding the unit from the front of the panel, push the mounting bracket toward the rear of the panel as tightly as possible.
Common Specifications
Data Retention
10 years minimum
Mounting
Through the panel bezel-mount, push-on (removable) bracket
Size
1.89W x 0.95H x 1.89”D (48W x 24H x 48mmD), with 0.16” (4.0mm) in front of panel
Panel Cutout
1.77W x 0.87H, +0.008/-0.00 inches (45W x 22H, +0.2/-0.0 mm)
Click
here to ask us a question
