View Cart | Contact Us | My Account 
Call us Toll-Free: 888-472-6676  

  Show Green Negative
  Show No Backlight
  Show Amber Negative
  Show Blue Negative
  Show Red Negative
DPL-8

4-20mA loop powered LCD

• Loop powered
• Provides a large,.98”, 3-1/2 digit display.
• Optional Red, Blue, Green or Amber backlighting
• Decimal point user selectable
• Eng. units user selectable
• Snap-in panel mounting

See bottom of page for Pricing  

 
(Click the tabs for more info)
The DPL-8 provides a loop powered 0.98", 3 1/2 digit LCD (standard black numerals) with optional 24Vdc powered red, blue, amber, or green negative backlight. It is compatible with virtually any 4 to 20mA dc process loop. User selectable °F, °C, PSI, and % engineering units can be displayed. Fully loop compatible. Separate zero and span adjustments. Decimal point user selectable. Factory calibration available.
Ordering Information
Display: Digits: 3 œ Digits (±1999 counts)  
Type: 0.98? ( 24.9 mm)  
Backlighting*: Optional Red Negative (red numbers/black background)  
Optional Blue Negative (blue numbers/black background)  
Optional Green Negative (green numbers/black background)  
Optional Amber Negative (amber numbers/black background)  
Polarity: Automatic, ?-? Displayed.  
Decimal Points: 3 Position, User Selectable  
Overload: Three lower order digits blank for inputs >1999 & <-1999  
Hold: Display Hold Function is Standard  
Annunciators: PSI,°F,°C,% (user selected),  
Inputs: Ranges: ±200.0mV, +/-2.000V, +/-20.00V DC, 4-20mA  
Configuration: Bipolar, Differential  
Protection: ±350V DC, (±100V DC on 200mV Range)  
(±30 mA on 4-20mA)  
Impedance: >1 MW, (>10 MW on 200mV Range)
Performance: Accuracy: ±(0.05% FS +1 counts)  
Conversion Rate: 3 per Second  
Normal Mode Rejection: >30 db @ 60 Hz  
Common Mode Range: ±1V DC  
Common Mode Rej.: >86 dB  
Zero Adjustment: Automatic  
Warmup: 10 Minutes Typical  
Temperature Coeff.: ±100 ppm per °C Typical  
Environment: Operating Range: -10 to 50 °C  
Storage Range: -40 to 75 °C  
Power Supply: Powered by mA control loop. Loop Burden 300 W nominal  
Optional Backlight: 24V DC at 35 mA typical  
Mounting: Snap-In Panel Mount  
Connection: 4 screw terminal (4-20mA)  
13 pin male connection (voltage)  
13 pin connector/wiring harness included
Ordering Information
Provides a large,.98?, 3-1/2 digit display.  
• Optional Red, Blue, Green or Amber backlighting
• Decimal point user selectable  
• Eng. units user selectable  
• Snap-in panel mounting  
• Gasket and clamp provided for NEMA 4 or 12 applications