The DPL-8 provides a loop powered 0.98", 3 1/2 digit LCD (standard black numerals) with optional 24Vdc powered red, blue, amber, or green negative backlight. It is compatible with virtually any 4 to 20mA dc process loop. User selectable °F, °C, PSI, and % engineering units can be displayed. Fully loop compatible. Separate zero and span adjustments. Decimal point user selectable. Factory calibration available.
Specifications
Display:
Digits:
3 ½ Digits (±1999 counts)
Type:
0.98” ( 24.9 mm)
Backlighting*:
Optional Red Negative (red numbers/black background)
Optional Blue Negative (blue numbers/black background)
Optional Green Negative (green numbers/black background)
Three lower order digits blank for inputs >1999 & <-1999
Hold:
Display Hold Function is Standard
Annunciators:
PSI,°F,°C,% (user selected),
Inputs:
Ranges:
±200.0mV, +/-2.000V, +/-20.00V DC, 4-20mA
Configuration:
Bipolar, Differential
Protection:
±350V DC, (±100V DC on 200mV Range)
(±30 mA on 4-20mA)
Impedance:
>1 MW, (>10 MW on 200mV Range)
Performance:
Accuracy:
±(0.05% FS +1 counts)
Conversion Rate:
3 per Second
Normal Mode Rejection:
>30 db @ 60 Hz
Common Mode Range:
±1V DC
Common Mode Rej.:
>86 dB
Zero Adjustment:
Automatic
Warmup:
10 Minutes Typical
Temperature Coeff.:
±100 ppm per °C Typical
Environment:
Operating Range:
-10 to 50 °C
Storage Range:
-40 to 75 °C
Power Supply:
Powered by mA control loop. Loop Burden 300 W nominal
Optional Backlight:
24V DC at 35 mA typical
Mounting:
Snap-In Panel Mount
Connection:
4 screw terminal (4-20mA)
13 pin male connection (voltage)
13 pin connector/wiring harness included
Amber Negative
Blue Negative
Red Negative
Features
Provides a large,.98”, 3-1/2 digit display.
• Optional Red, Blue, Green or Amber backlighting
• Decimal point user selectable
• Eng. units user selectable
• Snap-in panel mounting
Click
here to ask us a question
