SC40
Capacitive Proximity Sensors M40 x 1.5
Specifications
| NOT EMBEDDABLE (NON FLUSH MOUNTING) | ||||
| Dimensions mm - TECHNICAL CHARACTERISTICS |  |
| ||
| AMPLIFIED 4 WIRES D.C. ANTIPHASE NPN NO+NC | SC40P - CE35 NPN NO + NC | |||
| AMPLIFIED 4 WIRES D.C. ANTIPHASE PNP NO+NC | SC40P - CE35 PNP NO + NC | |||
| AMPLIFIED 2 WIRES A.C. NO | SC40P - AE35 NO $139.65 Add to Cart |
SC40P - AE35 TE/TD NO | ||
| AMPLIFIED 2 WIRES A.C. NC | SC40P - AE35 NC $139.65 Add to Cart |
SC40P - AE35 TE/TD NC | ||
| Switching Distance (Sn) adjustable mm | 0/35 | 0/35 ---> | ||
| Continuous voltage (residual ripple <=10%) V | 10/55 | 20/250 | - | |
| Alternating Voltage 50/60 Hz (V) | 20/250 ---> | |||
| Hysteresis (%Sn) mm | In relation to Sn | In relation to Sn ---> | ||
| Switching frequency Hz | 10 | 10 | In relation to Sn | |
| Repeatability (at constant temperature) mm | <2 | <2 ---> | ||
| Max Output Current mA | 300 | 500 | 300 | |
| Min Output Current mA | - | 10 (Min. release current) | 20 | |
| Max Peak Current for 20 ms A | - | 1.5 ---> | ||
| Absorption at 24Vdc mA | <10 | |||
| Residual Current mA | - | <=2 | <3 | |
| Voltage drop (sensor ON) V | <1.8 | <6 ---> | ||
| Short circuit protection | Incorporated | Incorporated (Up to 50V in D.C.) | - | |
| Led | Incorporated | Incorporated ---> | ||
| Temperature limits °C | -20 / +70 | -20 / +70 ---> | ||
| IP rating (IP) | 67 | 67 | 65 | |
| Housing | Red plastic makralon | Blue plastic makrolon ---> | ||
| Cable PVC 2m | 4 x 0.25 mm^2 | 3 x 0.50 mm^2 | 2 x 0.50 mm^2 | |
| Connector plug | - | - | - | |
| Protection housing | On request protection housing with 2 inch fixing | |||
INSTRUCTIONS FOR CORRECT INSTALLATION
SC40P-AE35 DELAYED - AVAILABLE RANGE
SC40P-AE35 TE NO, delay on energization N.O. contact.
In the absence of material the sensor has an open contact. When the material enters the sensing area, the delay set starts. A the end of this time the contact closes. When the material leaves the sensing area, the contact opens instantaneously.
SC40P-AE35 TE NC, delay on energization N.C. contact.
In the absence of material the contact of the sensor is closed. When material enters the sensing area, the contact opens. When material leaves the area, the delay set starts, after which the contact closes.
SC40P-AE35 TD NO, delay on de-energization N.O. contact.
In the absence of material the contact of the sensor is open. When material enters the sensing area, the contact closes. When material leaves the area, the delay set starts, after which the contact opens.
SC40P-AE35 TD NC, delay on de-energization N.C. contact.
In the absence of material the contact of the sensor is closed. When material enters the sensing area, the delay set starts, after which the contact opens. When material leaves the area, the contact closes instantaneously.
RANGE OF STANDARD TIME DELAY
FROM 1 to 15 minutes.
In the absence of material the sensor has an open contact. When the material enters the sensing area, the delay set starts. A the end of this time the contact closes. When the material leaves the sensing area, the contact opens instantaneously.
SC40P-AE35 TE NC, delay on energization N.C. contact.
In the absence of material the contact of the sensor is closed. When material enters the sensing area, the contact opens. When material leaves the area, the delay set starts, after which the contact closes.
SC40P-AE35 TD NO, delay on de-energization N.O. contact.
In the absence of material the contact of the sensor is open. When material enters the sensing area, the contact closes. When material leaves the area, the delay set starts, after which the contact opens.
SC40P-AE35 TD NC, delay on de-energization N.C. contact.
In the absence of material the contact of the sensor is closed. When material enters the sensing area, the delay set starts, after which the contact opens. When material leaves the area, the contact closes instantaneously.
RANGE OF STANDARD TIME DELAY
FROM 1 to 15 minutes.
Distributors welcome.
