1-888-472-6676

Acculex Panel Meters

AECO Sensors

Counters / Timers

Hartmann Switches

Plaimae Switches

Acculex Printers

Resources

Contact Acculex

SC30P-RE25T Detail

HOME →AECO SENSORS→CAPACITIVE→SC30P-RE25T

SPECIFICATIONS

This proximity sensor belongs to the capacitive sensor family, it supplies a signal to the external load which can be delayed up to 10 min. when any material solid or liquid (water, glass, wood, metal, coffee, powders etc.) come into the sensing area, it is used principally as a level control. This model is completely programmable regarding the delay in energization and de-energization with open or closed output, the sensor does in fact contain a 1A 220V changeover relay.

Due to its versatility, programmability and high power output compared to a normal electronic sensor, the stocking of product for the wholesaler is simplified as is the adaptability of the switch to any application. This sensor can be used with the protection housing SCM-R which is of POM and therefore satisfies the most severe abrasion resistance requirements. When used as a level control, this housing allows for the sensor to be substituted whenever required.

Products

	Product	Price	Add to cart
	SC30P-RE25T	$0.00

Working Principle:

Application:

Adjustment:

Spacing:

Other:

FUNCTION TE NO - delay on energization N.O. contact.

In the absence of material the sensor has an open contact. When the material enters the sensing area, the delay set starts. A the end of this time the contact closes. When the material leaves the sensing area, the contact opens instantaneously.

FUNCTION TE NC - delay on energization N.C. contact.

In the absence of material the contact of the sensor is closed. When material enters the sensing area, the contact opens. When material leaves the area, delay set starts, after which the contact closes.

FUNCTION TD NO - delay on de-energization N.O. contact.

In the absence of material the contact of the sensor is open. When material enters the sensing area, the contact closes. When material leaves the area, delay set starts, after which the contact opens.

FUNCTION TD NC - delay on de-energization N.C. contact.

In the absence of material the contact of the sensor is closed. When material enters the sensing area, the delay set starts, after which the contact opens. When material leaves the area, the contact closes instantaneously.

Programable Function Table

Function	Swich Pos.	Relay Output / Wires Color
TE NO	B	Red / Black
TE NC	A	Red / Black
TD NO	A	Red / White
TD NC	B	Red / White

Install / Adjust:

SC30P-RE25T

Wiring:

SC30P-RE25T

Connectior:

Specifications:

Switching Distance Sn (Adjustable) mm

Multivoltage power supply

Hysteresis (%Sn) mm

Max switching frequency Hz

Repeatability (at constant temperature) % Sn

Max output current mA

Absorption (relay activated) mA

LED

Temperature Limits °C

IP rating IP

Standard range of delay min.

Housing

PVC Cable 2m

Protection Housing

SC30P-RE25T

0 / 25

18 / 50 Vdc 18/240 Vac(50/60 Hz)

Depending on Sn

Depending on delay

< 1

Changeover 1 A - 220 Vac

Incorporated

-20 / +70

1 - 10 (on request higher)

Plastic (Makrolon)

5 x 0,35 mm²

Possible mounting

Cart Instructions

Use the 'Order here...' links located through-out the product pages. Then use the checkout button to use our secure check out system.
Terms of service