1-888-472-6676
1-888-472-6676
FTL-FDL Fiber Optic Detail
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Fiber optic sensors function electronically like any other photoelectric sensor with the difference that the light emitted and received is transported by an optical fiber the end of which is very small and in different forms and it can be installed some distance from the electronic circuit. The reduced dimension of the fiber allows the sensing of very small objects and their installation in areas where other sensors would not fit. Furthermore they can be used in explosion risk areas as well as in liquids and have a very high resistance to mechanical damage and to vibrations which makes them suitable for installation on machinery were movement is involved. They are available in the reflection and barrier emitter/ receiver. The light source is red and the length of the standard fibers is 2 meters. |
|
| Products | Adjustment | Other | Wiring | Specifications |
Products
| Product | Price | Add to cart | |
|---|---|---|---|
 |
FDL 010 | $65.55 |  |
|
FDL 020 | $101.50 | |
|
FDL 120 | $160.95 | |
|
FDL 210 | $143.30 | |
|
FDL 310 | $101.65 | |
|
FDL 311 | $146.90 | |
|
FTL 000 | $79.05 | |
|
FTL 100 | $79.05 | |
|
FTL 300 | $134.15 | |
Working Principle:
Application:
Adjustment:
FIBER OPTIC SENSORS - NOTES AND CAUTIONS FOR CORRECT OPERATIONS
FIBER PROBES
Cutting-free type plastic fibers can be cut by the optional cutter (AT118) at any desired length Cut the plastic fiber before connection. Make sure to cut it sharply since the status of cutting surface influences to the sensing distance which might be reduced by up to 20%. Cutting should be done sharply by one action, and do not use the same hole more than once.
FIBER FIXING
Use the supplied spring lockwasher for fixing the fibers with threaded bushing in order not do damage the fibers with excessive force. When fixing the non-threaded head type with a set-screw (M3 max.) as indicated on the left side scheme, apply a torque of 3 kgf/cm max.
CONNECTION OF DIRECT REFLECTION MULTI-CORED FIBER
Put the SINGLE-CORED fiber to the LIGHT-EMITTER side and the MULTICORED fiber to the RECEIVER side.
STAINLESS SLEEVE FIBERS
The fibers with this type of terminal are very useful when the installation is done in locations not easily accessible and this can be obtained bending the sleeve in relation to the required position. Make the bending radius to be processed on anneals stainless sleeve on the sensing head as large as possible according to the sleeve diameter rate as indicated on the left side scheme.
Spacing:
Other:
Install / Adjust:
Wiring:
|
|
|
 | ||
Connectior:
Specifications:
Type of sensing |
Sensing distance (mm) |
Application |
Cutting |
Fiber Type |
FTL 300 |
FTL 100 |
FTL 000 |
FDL 311 |
FDL 310 |
FDL 210 |
FDL 120 |
FDL 020 |
FDL 010 |
Thru Beam - Emitter - Reciever |
Thru Beam - Emitter - Reciever |
Thru Beam - Emitter - Reciever |
Direct Reflection |
Direct Reflection |
Direct Reflection |
Direct Reflection |
Direct Reflection |
Direct Reflection |
150 |
150 |
150 |
10 |
60 |
70 |
60 |
60 |
60 |
Standard |
Standard |
Standard |
Detecting Small Objects |
Standard |
Standard |
Positionings |
Positionings |
Standard |
Possible |
Possible |
Possible |
Not Possible |
Possible |
Not Possible |
Not Possible |
Possible |
Possible |
 |
|
|
 |
 |
|
 |
|
|
Use the 'Order here...' links located through-out the product pages.
Then use the checkout button to use our secure check out system.
Terms of service
