DP-H57 Detail
HOME→
COUNTERS TIMERS→
TIME METERS→
DP-H57
The DIN standard front dimension of 1.88" x 1.88" (48 x 48mm) makes these hour
meters suitable for flush mounting and optional 2.16" x 2.16" (55 x 55mm) and 2.83" x
2.83" (72 x 72mm) bezels are available. Model DP-4AH57 is suitable for base or DIN rail
mounting. The base mount is either screwed down or fitted to the rail and the meter is
then clipped into it.
These hour meters normally display to a resolution of tenths of an hour. The AC model
shows a rotating white striped wheel to indicate that it is operating.
The AC unit normally operates 24, 115 and 230VAC 50Hz but other voltages and 60Hz
versions are available to special order.
On AC models the mains supply (50 or 60Hz) is used as the frequency standard. On DC
models the frequency is quartz crystal controlled.
Electrical connection is via screw terminals but versions having flat 0.03" x 0.25"
(0.8 x 6.3mm) pins or flying leads are also available. 2.16" x 2.16" (55 x 55mm) and
2.83" x 2.83" (72 x 72mm) bezels are available.
Products
|
Product |
Description |
Price |
Add to cart |
 |
DP-H57 |
Panel mounted hour meter |
$44.00 |
 |
Features:
- 7 digit 4mm white on black for hours, red on black for decimal.
- Standard 48 x 48 DIN size.
- Rugged and insulated plastic case.
- DC or AC (50 or 60Hz). Synchronous motor drive for AC model.
- Quartz crystal frequency control for DC model.
- Extended temperature range model available to special order.
- Isolation protection to VDEO435.
Application:
- Service interval monitoring
- Machine run time monitoring
- Machine utilization timing for pricing, estimating etc.
- Warranty or rental time measurement
Specifications:
| Supply Voltage |
24, 115 or 230VAC +10% -20% 50 or 60Hz. 12 - 24, 36 - 80 or 110 VDC ±15% |
| Power Consumption |
Approx 1.2VA at 230VAC, approx 180mW at 12VDC |
| Display |
0.16" (4mm) characters. Hours - white on black, decimal - red on black |
| Environmental Protection |
IP52, DIN 40 050 from front |
| Operating Temp. |
-15°C to +50°C (AC). -20°C to +60°C (DC) |
| Mounting |
Flush mount using bezel or screw or rail mount to DIN 46 277 using base mount |
| Weight |
1.7 oz (48g) (DP-H57), 3.0 oz (84g) (DP-AH57) |
Common Specifications:
Dimensions:
| Cutout: |
|
| Height |
1.81" (46 mm) |
| Width |
1.81" (46 mm) |
Mounting:
